|Tech Data Sheets in Acrobat Format | MSDS in Acrobat Format | Online- Ordering Authorization Form | Home
|
|Tech Data Sheets in Acrobat Format | MSDS in Acrobat Format | Online- Ordering Authorization Form | Home
|
Epoxy Systems? Product #504/505POLYPASTE
High Temperature
Industrial Polyester
DESCRIPTION
POLYPASTE is a fast-setting industrial filler paste used for manufacturing,
fabrication and repair in aircraft, aerospace and other industries having
requirements for above normal temperature exposure. Fast and permanent
applications are achieved by POLYPASTE.
The service temperature of Filler 7 is up to 400 degrees F (205 degrees C). POLYPASTE
is used in the construction industry to seal cracks for injection and for
patches used on concrete, wood, steel and other suitable construction materials. Excellent
machining and finishing results are accomplished by grinding, sanding, scraping,
etc. When exposed to elevated temperatures, POLYPASTE
has a tendency to darken but does not gas, bubble, or cause any finish
distortion. This product does not contain wax and readily bonds to itself and
other substrates such as FRP/SMC, hi-temp epoxy molds, aluminum, steel, cast
iron, urethane foam parts, etc. POLYPASTE is non-metallic, non-conductive, and non-sparking. APPLICATION
PROCEDURES
Surface Preparation
Prior
to application, area to be repaired should be roughened and thoroughly wiped
clean to ensure proper adhesion. Mixing Instructions
Thoroughly
blend 100 parts resin (a golf ball sized mass) with 2 parts (2? strip)
hardener for 1 1/2 minutes in a clean dry container carefully scraping sides and
bottom of container during the mixing process to ensure uniformity. Application
POLYPASTE should be applied by ?buttering? onto area to be repaired. After
material has cured, the repair area can be sanded to desired surface finish. STORAGE
POLYPASTE should be stored at a temperature less than 75
degrees F. Storage above 75degrees F will shorten the shelf life and render the
product unusable. The shelf life for this product is six months. SAFETY
PRECAUTIONS
For industrial use only.
Keep away from children. Refer to Material Health and Safety Data Sheet (MSDS
form) pertaining to this product before using. Avoid contact with skin or
eyes. In the event of eye splash or contact, immediately flush with water for 15
minutes and contact physician. It skin contact occurs, wash with mild soap and
water. Prolonged or repeated exposure may cause skin and eye irritation. It is
recommended that the user wear impervious gloves and safety glasses with side
shields.
Epoxy Systems™ Product Company ("ESI") warrants for a period of one (1) year that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of ESI. If any product fails to meet this warranty, the liability of ESI will be limited to replacement of any non-conforming material if notice of such non-conformity is given to ESI within (1) one year of delivery of materials, ESI may in its discretion refund the price received by ESI in lieu of replacing the material. No customer, distributor, or representative of ESI is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of ESI. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. ESI reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. ESI'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND ESI SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. No returns on non-stocking colors, or items. No returns after 10 days. Returns must be unopened containers. All returns must be authorized in advance. Restocking charges will apply to returns. No returns on non-list priced items. All Returns are for account credit only. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. |
|
Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have. For more information please contact: Epoxy.com Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time). 321-206-1833 Customer Service - Ordering and Order Status 714-657-3826 Technical Support 352-489-1625 Fax line to all Departments 24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. Epoxy Systems™ Product Company ("ESI") warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. ESI warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of ESI. If any product fails to meet this warranty, the liability of ESI will be limited to replacement of any non-conforming material if notice of such non-conformity is given to ESI within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). ESI may in its discretion refund the price received by ESI in lieu of replacing the material. No customer, distributor, or representative of ESI is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of ESI. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. ESI reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. ESI'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND ESI SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability. Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.
[Technical
Data Sheets in Adobe Acrobat Format][MSDSs
in Adobe Acrobat Format][Online-
Ordering Authorization Form]
|
