Epoxy.com Listing of Elastomeric Coatings,
Elastomeric Decking and Elastomeric Waterproofing Membranes
Useful Product to Prepare the Substrate for Elastomeric Coatings,
Elastomeric Decking and Elastomeric Membranes
 |
Product
#10 Lo-Mod Adhesive- is a useful
tool for rebuilding a damaged substrate, where an elastomeric system
will be installed over it. Epoxy.com Product #10 is a
100% solids
Lo-Mod (semi-flexible) Low Viscosity (very thin) adhesive used as a binder for epoxy mortar systems
in patching and grouting applications, as a seal coat for non-skid
surfaces
outside, and as a primer to insure high bond strength for coatings and
patches.
|
|
|
Product #11 Epoxy Joint Filler
- is not as elastomeric as Product #900 and
Product 901, but it is useful where you need
something semi-flexible, but need it to hold up to heavy weight.
Epoxy.com Product #11 is a 100% solids flexible epoxy joint filler for saw-cut joints of
concrete
slabs on grade, or to repair existing slabs. Product #11 absorbs the
impact and shock of heavy loads and steel wheeled traffic, preventing
erosion
of control joint edges. |
|
|
Product
#703 Flexible
Gel Adhesive
is a non-sagging material that is ideal for
repairs on vertical or overhead surfaces.
|
Elastomeric Coatings, Elastomeric Decking and
Elastomeric Waterproofing Membranes.
|
|
Product #32 Flexible
Epoxy Membrane is a flexible
resin used as an epoxy membrane and as a Product #32 mortar. Epoxy
Systems'
Product #32 is a two component, 100% solids epoxy used as a base in many
Epoxy Systems' Floor and Mortar Systems. Product #32 resists cracking
caused
by horizontal substrate movement, providing a crack resistant,
resilient,
sound absorbent, waterproof, durable floor. Epoxy Systems' Product #32
offers
stress-relieving properties for floor slabs that show movement or
vibration.
Product #32 is excellent for use in areas such as mechanical equipment
rooms,
large animal rooms and activity centers. |
|
|
PRODUCT #400
Chemical
Resistant Urethane is a two component, chemical resistant,
polyurethane coating. The high gloss finish offers excellent abrasion
resistance,
chemical and stain resistance, and superior color retention. It can
be used equally well on vertical or horizontal surfaces. It is ideal for
concrete floors. It is used as a finish coating option for most
EpoxySystems’
Flooring Systems. |
|
|
Product #401 -
Urethane Coating
is a two (2) component, high-solids,
urethane coating. Urethane Coating is a two (2) component, high-solids,
urethane coating. Epoxy.com PRODUCT #401
is a superior coating that provides the ultimate in weather resistance.
Epoxy.com PRODUCT #401 offers
outstanding abrasion resistance, excellent chemical resistance and color
retention in severe conditions. Epoxy.com PRODUCT #401
offers the utmost in a light stable, weather-resistant coating.
Epoxy.com PRODUCT #401 is an excellent coating
for concrete, wood and primed steel. Brush, roller or spray can apply
Epoxy.com PRODUCT #401. PRODUCT #401
is a convenient 2:1 ratio, by volume, with a
pot life of six (6) hours plus.
|
|
|
Product #402 - 2
Component Chemical Resistant Coating - is
a two component1 chemical resistant polyurethane coating with
gloss finish offers excellent abrasion resistance, chemical and stain
resistance, and color retention. Epoxy.com PRODUCT #402
can be used equally well on vertical or horizontal
surfaces. It is ideal for concrete floors and walls in warehouses,
storage facilities, aircraft hangers, animal housing, and vehicle
maintenance facilities. Product is
not for use in California |
|
|
Product #407 Aliphatic Traffic Bearing Membrane
is a two component, ultra high solids aliphatic polyurethane elastomeric
membrane. When applied, it is resilient and accommodates movement in
concrete substrates. Epoxy.com Product #407 is used as a top coat
traffic bearing membrane or non-skid coating that retains color and
physical properties when exposed to harsh UV conditions. Epoxy.com
Product #407 is used as a system with Epoxy.com Product #882, and
may be applied as the top coat on Epoxy.com Product
#409 to maximize cost
effectiveness. Epoxy.com Product #407 cures at ambient
temperatures and is impermeable to moisture, oils, mild acids, gasoline,
and alkalies. |
|
|
409 Traffic Bearing Membrane
is a Resilient Traffic Bearing Membrane
is a 100% solids, ambient cure impermeable elastomer. PRODUCT
#409
is resistant to moisture, oils, mild acids, gasoline, and alkalies.
PRODUCT
#409 when applied to concrete or other surfaces, is resilient
and accommodates
movement in concrete substrates. PRODUCT #409 is used
as a traffic
bearing membrane or non-skid coating that retains color and physical
properties
when exposed to harsh UV conditions. |
|
|
Product #410 replaced by
409 Traffic Bearing
Membrane |
|
|
EpoxySystems' Product # 441
is a two component water-based aliphatic (non-yellowing)
polyurethane. It is free of the health and
environmental problems
normally found in solvent-based urethanes, while maintaining excellent
performance
properties. Product # 441 polyurethane provides a
matte finish.
Product # 441 has good chemical, stain, and mar
resistance. In addition,
it’s easy to clean and has excellent color retention under heavy foot
traffic.
It is a high performance coating for use in a variety
of seamless
floor and wall coating systems. Product # 441
eliminates the strong
solvent odor normally associated with many high performance materials.
It’s
ideal for topcoats and finishes that require high abrasion resistance.
Typical
application areas are clean rooms, hospitals, pharmaceutical facilities,
stained concrete, wood floors, and as a seal coat for most Epoxy
Systems,
Inc. floor and wall coating systems. |
|
|
#449
Elastomeric Polyurethane Membrane Waterproofing
is a two-component, modified elastomeric material. After mixing and curing
it forms a tough, flexible waterproof
membrane.
Epoxy.com Product #449 Membrane is applied to horizontal
surfaces of concrete, steel or wood to prevent penetration of moisture and
other deleterious substances. Typical applications are between slab waterproofing above and below grade.
|
|
|
Product #600
Flexible Novolac is a two-component, 100% solids epoxy
coating based
on multi-functional high performance flexibilized resin. PRODUCT #600
provides
corrosion resistant protection to steel, other metals and concrete. It
has
excellent resistance to chemicals up to 300oF. It is resistant to
continuous immersion in water up to 212oF . PRODUCT #600 is formulated
in
a convenient 1 to 1 ratio, by volume mix ratio and has a long pot life
to
simplify application. PRODUCT #600 is more effective in applications
which
entail force curing. |
|
|
PRODUCT #674 -
Electrostatic Dissipative Urethane Coating
is a two component, Electro Static Dissipative chemical resistant,
polyurethane
coating. The high gloss finish offers excellent abrasion resistance,
chemical
and stain resistance, and superior color retention. EPOXYSYSTEMS’
PRODUCT
#674 can be used equally well on vertical or horizontal surfaces. It is
ideal for concrete floors and walls in warehouses, storage facilities,
aircraft
hangars, animal housing, and vehicle maintenance facilities. Available
in
both clear and pigmented formulations, EPOXYSYSTEMS’ PRODUCT #674 is
used
as a finish coating option for most EpoxySystems’ Flooring Systems. |
|
|
Product #675 Electrostatic Dissipating
Water Borne Epoxy Topcoat-a pigmented, water emulsion
epoxy electro-static
dissipative finish designed to have maximum penetration into concrete
surfaces
to provide high bond strength and adhesion. It has very low odor and can
be used in occupied areas as a finish sealer in Thin-Film Electro-Static
Dissipative Coating Systems. |
Primers for Elastomeric Coatings, Elastomeric Decking/Flooring and
Elastomeric Membranes
Epoxy.com Elastomeric Joint Sealants for use with Elastomeric Coating,
Elastomeric Decking and Epoxy.com Elastomeric Waterproofing
Membranes
|
|
Product #900
Polymeric Caulking-
Gun Grade is a 2 part
chemically cured
elastomers. They provide a flexible and watertight seal between
concrete,
masonry, metals, glass, wood, and other construction materials.
Product
#900 (Gun Grade)/ Product #901 (Pourable)
are mixed just prior
to application. Color is light gray. (Other colors are available on
special
order.) |
|
|
Product #901
Polymeric Joint Sealant
- Pourable Grade is a 2 part chemically cured
elastomers. They provide a flexible and watertight seal between
concrete,
masonry, metals, glass, wood, and other construction materials.
Product
#900 (Gun Grade)/ Product #901 (Pourable)
are mixed just prior
to application. Color is light gray. (Other colors are available on
special
order.) |
|
|
Product #954 Joint Sealant is a two
component extended polyurethane elastomer self-leveling joint sealant
for joints in concrete, asphalt, or metal. When poured into a horizontal
joint, Epoxy.com Product #954 is an excellent elastomeric joint
sealer with "great memory". Epoxy.com Product #954 is also
available for machine mixing. |
|
|
Product #964 Polymeric Joint Sealant is a
two-component chemically cured polysulfide sealant that provides
excellent resistance to bioactivity and the harsh conditions encountered
in wastewater treatment plants.
Epoxy.com Product #964 Polymeric Joint Sealant cures to a flexible
rubber that provides a watertight seal between concrete, masonry,
metals, glass, wood, and other construction materials. Epoxy.com
Product #964 is available in self-leveling. Use
Product #965 for a non-sag consistency. |
|
|
Product #965
Polymeric Joint Sealant is a two-component chemically
cured polysulfide sealant that provides excellent resistance to bioactivity
and the harsh conditions encountered in wastewater treatment plants.
Epoxy.com Product #965 Polymeric Joint Sealant cures to a flexible rubber that
provides a watertight seal between concrete, masonry, metals, glass, wood,
and other construction materials. Epoxy.com Product #965 is has a non-sag consistency.
For a pourable consistency use Product #964.
|
Tools and Equipment for Installing Epoxy.com Elastomeric Coatings,
Elastomeric Decking, and Elastomeric Waterproofing Membrane Systems.
- Fiberglass Tape Tytex 4 inch x 324
feet
- Fiberglass Woven For Reinforcement
- Gage Rake for overlays
- Mixing Paddles - drill mixers, Speedy
mixers, Mud and Resin Mixers, and Cast head mixers
- Spiked Rollers- for overlays
- Spinney Rollers - for overlays
- Shed Resistant Roller Covers
- Professional Rollers Covers
- Jumbo 2 1/4 Diameter Core Roller
Covers
- Perforated Core Roller Covers
- Roller Handles
- Floor Squeegees
- Serrated Edge Floor Squeegees
- Wood Back Squeegees
- Mini Roller Covers and Frames
- Rubber Gloves
- Paint Brushes
- Backer Road
- Expansion Board
- and more ...
|
