[Home][Catalog of Products][Where to Start][Bonding Systems][Chip Floors][Chemical Resistance] [Coatings][Conductive][Applications][Elastomeric & Polyurethane Systems][High Temperature] [Industrial Floors][Epoxy and Urethane Injection][Joint Systems & Sealants][Mortars / Grouts] [Polymer Systems] [Primers & Sealers] [Misc.] [Seamless Flooring][Waterproofing][Dealers Wanted] [Installation Tips][Product Guide][Wood Filler][Who We Are][FAQs][Guest Book] [Guide Specs][Tech Data Sheets in Acrobat Format][MSDS in Acrobat Format] [Online- Ordering Authorization Form]
Epoxy.com Product #449 Membrane Waterproofing and Reinforced Membrane Waterproofing is a two-component, modified elastomeric material. After mixing and curing it forms a tough, flexible waterproof membrane.
Epoxy.com Product #449 Membrane is applied to horizontal surfaces of concrete, steel or wood to prevent penetration of moisture and other deleterious substances. Typical applications are between slab waterproofing above and below grade.
Epoxy.com Product #449 may be applied in one coat up to 30 mil thickness on vertical surfaces without sag.
Epoxy.com Product #449 when used with inorganic fiber reinforcement, provides a puncture and tear resistant shield to bridge construction joints and fine cracks.
PHYSICAL PROPERTIES:
Cured Materials:
Combine equal amounts of Components A and B in clean container. Mix 2 - 3 minutes with low speed drill and an Epoxy.com Mixing Paddle. Apply immediately after mixing.
Prior to applying membrane, the surface to receive membrane must be dry, clean and sound, all construction joints and cracks that are sizable must be bridged with fiberglass reinforcing cloth.
To produce a membrane, apply by brush, roller, spray or squeegee. For best results, two coats are recommended.
If reinforced cloth is used, it shall be embedded in the first coat of membrane while it still in a liquid state. A grooved aluminum or plastic roller can be used for this purpose. After the first coat of membrane and reinforcement has become tack-free, a second coat of membrane shall be applied.
On smooth concrete 80 sq. ft./G without Reinforcement (6.04 m2/3./3.785 1)
Epoxy.com Product #449 has an odor. If used indoors where such odor might be objectionable, it is recommended that the material is tested before use to determine the appropriateness of its use. Material temperature at time of mixing must be a minimum of 60oF (16oC), and surfaces to receive material must be a minimum of 40oF (4oC).
Once the container has been opened, the entire contents should be used as resealing may cause moisture, contamination and skinning. When used in confined areas, good ventilation must be provided. Damp surfaces could be detrimental to the performance of Epoxy.com Product #449.
Epoxy.com Product #449 is packaged in 2-gallon (7.57 liter) and 10- gallon (37.85 liter) units. Epoxy.com Product #449 Primer for metal surfaces is available in 1-quart (.946 liter), 1-gallon (3.785 liter), and 5-gallon containers (18.925 liters).
Epoxy.com Product #449 contain coal tar and organic isocyanates. These are considered irritants. Provide adequate ventilation. Avoid breathing vapors. Contact with skin or eyes must be avoided. Wear protective clothing, gloves and/or protective cream and goggles. Wash thoroughly with soap and water or a waterless skin cleaner prior to smoking or eating. In case of contact with eyes, flush immediately with water and contact a physician. If swallowed, call a physician immediately.
Epoxy.com Home Page Product Catolog Important Links Epoxy Coatings Novolac Coatings High Temperatate Coating Install Guide Epoxy Coating Calculator All Purpose Coating Chemcial Resistant Coating Coal Tar Epoxy 100% solids Rebar Coating Tank Coating Mastic High Build All Purpose Wall Grade Chemcial Resistant Wall Grade Coal Tar Epoxy Solvented Flexible Novolac Coating Novolac Coating #637 Chemical Resistant Primer #634 High Temp High Chemical Resistance #636 High Temp High Chemical Resistance Untitled Page Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have. For more information please contact: Epoxy.com A Division of Epoxy Systems, Inc 20774 W. Pennsylvania Ave. Dunnellon, Florida 34431 Over 375 products, Since 1980 Florida & Vermont USA Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time). Closed 12Noon-1PM Eastern Time for Lunch. 321-206-1833 Customer Service - Ordering and Order Status Katey Fontaine, VP - Customer Service Director sales@epoxy.com 714-657-3826 Technical Support Norm Lambert, President - Technical Support Director info@epoxy.com 352-489-1666 Accounting and Administration Debby Lambert, CEO, and CFO office@epoxy.com 352-489-1625 Fax line to all Departments www.epoxy.com 24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253 Copyright © 1994-2007 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont. All rights reserved. Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. Epoxy Systems™ Product Company ("ESI") warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. ESI warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of ESI. If any product fails to meet this warranty, the liability of ESI will be limited to replacement of any non-conforming material if notice of such non-conformity is given to ESI within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). ESI may in its discretion refund the price received by ESI in lieu of replacing the material. No customer, distributor, or representative of ESI is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of ESI. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. ESI reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. ESI'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND ESI SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability. Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions. [Technical Data Sheets in Adobe Acrobat Format][MSDSs in Adobe Acrobat Format][Online- Ordering Authorization Form] Secure Login
Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have.
For more information please contact:
Epoxy.com A Division of Epoxy Systems, Inc 20774 W. Pennsylvania Ave. Dunnellon, Florida 34431 Over 375 products, Since 1980 Florida & Vermont USA Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time). Closed 12Noon-1PM Eastern Time for Lunch.
321-206-1833 Customer Service - Ordering and Order Status Katey Fontaine, VP - Customer Service Director sales@epoxy.com
714-657-3826 Technical Support Norm Lambert, President - Technical Support Director info@epoxy.com 352-489-1666 Accounting and Administration Debby Lambert, CEO, and CFO office@epoxy.com
352-489-1625 Fax line to all Departments www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Copyright © 1994-2007 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont. All rights reserved.
Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.
This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.
Epoxy Systems™ Product Company ("ESI") warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. ESI warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of ESI. If any product fails to meet this warranty, the liability of ESI will be limited to replacement of any non-conforming material if notice of such non-conformity is given to ESI within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). ESI may in its discretion refund the price received by ESI in lieu of replacing the material. No customer, distributor, or representative of ESI is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of ESI. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. ESI reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. ESI'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND ESI SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.
Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.
[Technical Data Sheets in Adobe Acrobat Format][MSDSs in Adobe Acrobat Format][Online- Ordering Authorization Form]
Secure Login